12 www.dimplex.com
for it to go all the way down into the bracket.
15.
16.
order from the instructions above.
! NOTE: If any tie wraps were removed, replace and en-
sure that none of the wires are pinched during reassembly.
! NOTE:
-
place.
LED LIGHT STRIP REPLACEMENT
Tools Required: Phillips head screwdriver
Needle-nose pliers
WARNING:-
vicing, allow at least 10 minutes for light bulbs and heating
elements to cool off to avoid accidental burning of skin.
WARNING: Disconnect power before attempting any
maintenance to reduce the risk of electric shock or damage
to persons.
1.
screws and carefully remove the glass assembly from
2. Carefully remove the acrylic media from the front tray.
3.
wall by carefully lifting it upward, releasing it from the
4.
! NOTE: If necessary, lay a protective barrier between
the unit and your work surface, (i.e. cloth, cardboard, thick
plastic) to avoid scratching your work surface.
5. On the right end, with the switchboard, remove the ten
6. Lay unit on its back and remove the remaining 9 screws
from the end panel.
7. Remove the end panel being careful not to add any
strain to the wires connecting to the switchboard.
8.
! NOTE: The wires are grouped together with tie wraps,
which may need to cut to easily access the different wires.
9. Remove both sets of the 3 end panel screws and the 5
8)
10. Remove the 5 screws that hold the LED light bracket
11. Remove the 2 screws holding the LED light strip to the
bracket, lay the new LED light strip back into the light
bracket and secure.
12. Trace the wires from the original LED light strip up to
the LED driver board, replacing them with the new
wires and any new tie wraps as required.
13. Remove and replace the wire connectors from the
terminals on the LED driver board.
! NOTE:
between the end of the connector and the switch to release
the wires.
14.
15.
order from the instructions above.
! NOTE: If any tie wraps were removed, replace and en-
sure that none of the wires are pinched during reassembly.
! NOTE:
-
place.
Figure 10
LED Bracket
Screws
