7
REMOTE CONTROL RECEIVER
REPLACEMENT
Tools Required: Philips head screwdriver
WARNING: Disconnect power before attempting any
maintenance to reduce the risk of electric shock or damage
to persons.
! NOTE: Ensure that all of the components that
contain water have been emptied before performing any
maintenance.
1. Disconnect and remove the media from the unit and
put them in a safe place.
2. Remove the 4 screws that secure the front grill to the
3. Remove the 4 screws around the remote control re-
ceiver attaching it to the unit.
4. Transfer the wire connectors from the terminals on the
original board to the same location on the replacement
board.
! NOTE:
between the end of the connector and the remote control
receiver to release the wires.
5. Re-assemble the remainder of the cassette in reverse
order from the instructions above.
POWER BOARD REPLACEMENT
Tools Required: Philips head screwdriver
WARNING: Disconnect power before attempting any
maintenance to reduce the risk of electric shock or damage
to persons.
! NOTE: Ensure that all of the components that
contain water have been emptied before performing any
maintenance.
1. Disconnect and remove the media from the unit and
put them in a safe place.
2. Remove the 4 screws that secure the front grill to the
3. Remove the 4 screws around the power board attach-
ing it to the unit.
4. Transfer the wire connectors from the terminals on the
original board to the same location on the replacement
board.
! NOTE:
between the end of the connector and the remote control
receiver to release the wires.
5. Re-assemble the remainder of the cassette in reverse
order from the instructions above.
TRANSFORMER REPLACEMENT
Tools Required: Philips head screwdriver
WARNING: Disconnect power before attempting any
Figure 4
Transformers
Power Board
Remote Control
Receiver
maintenance to reduce the risk of electric shock or damage
to persons.
! NOTE: Ensure that all of the components that
contain water have been emptied before performing any
maintenance.
1. Disconnect and remove the media from the unit and
put them in a safe place.
2. Remove the 4 screws that secure the front grill to the
3. Remove the screws that secure the transformer to the
unit.
4. Transfer the wire connectors from the terminals on the
original board to the same location on the replacement
board.
! NOTE:
between the end of the connector and the remote control
receiver to release the wires.
5. Re-assemble the remainder of the cassette in reverse
order from the instructions above.
SWITCH REPLACEMENT
Tools Required: Philips head screwdriver
WARNING: Disconnect power before attempting any
maintenance to reduce the risk of electric shock or damage
to persons.
! NOTE: Ensure that all of the components that
contain water have been emptied before performing any
maintenance.
1. Disconnect and remove the media from the unit and
put them in a safe place.
2. Remove the 4 screws that secure the front grill to the
3. Locate the defective switch and disconnect the wiring
connections noting their original locations.
! NOTE:
pry between the end of the connector and the switch to
release the wires.
4. Depress the retainer clips on the rear of the switch and
