Ref. 1-20 Confidential
2.7.2 PCL6 emulation
You cannot print within 4.2mm (50dots in 300dpi mode) on all four sides of the paper.
2.8 Print Speeds with Various Settings
Print speed is up to 22ppm for A4 size and 23ppm for Letter size when loading A4 or Letter
size paper from the paper tray in the plain paper mode.
Actual print speed varies depending on the media type or paper size as shown in the tables
below;
<A4/Letter size>
<Smaller size than A4 or Letter>
Note:
The print speed may vary according to conditions, such as paper size and paper tray.
When a smaller size paper than A4 or Letter is printed, the temperature on both edges of
the fuser unit is much higher than the temperature on the center of the unit where the
paper is fed depending on the setting or model. Therefore, the print speed is slowed in
order to decrease the temperature on the edges after the specified time, it is maximum
print speed when you first start printing.
The actual print speed varies depending on the paper size.
Media type setting All models
Thin Paper 11ppm (MFC7320)
20/21ppm (MFC7340)
22/23ppm
(DCP7030/7040/7045N,
MFC7440N/7840W)
Plain Paper
Recycled Paper
Thick Paper, Envelopes, Envelopes Thin 10ppm
Thicker Paper, Envelopes Thick 4ppm
Media type setting All models
Thin Paper 22/23ppm
Plain Paper 300 seconds 22/23ppm
8ppm
Recycled Paper 300 seconds 22/23ppm
8ppm
Thick Paper, Envelopes, Envelopes Thin 30 seconds 22/23ppm
8ppm
Thicker Paper, Envelopes Thick 4ppm
Terms of Use | Privacy Policy | DMCA Policy
2006-2023 Ready to Serve Manuals