*72937*
72937
IMPORTANT
These instructions are presented in step-by-step
sequence. It is very important that installation begins with
“1. Pre-Installation Site and Product Check” (page 3) and
continues as directed after each section.
WARNING
Always disconnect main power to the operator prior to
replacing.
Control box contains no serviceable parts inside.
Table of Contents
General Information ................................................................................................................................................................................... 1
 ............................................................................................................................................................................. 2
1 Pre-Installation Site and Product Check ................................................................................................................................................. 2
2 Installation............................................................................................................................................................................................... 3
3 Wiring...................................................................................................................................................................................................... 3
4 Keypad Settings...................................................................................................................................................................................... 7
5 System Test ...........................................................................................................................................................................................11
6 Troubleshooting .................................................................................................................................................................................... 12
7 Release for Service .............................................................................................................................................................................. 13
General Information
The Senior Swing Control Box is for use with the Senior Swing Power Operator System. The system can operate a single door (2810,
9530, and 9540 Series), a simultaneous pair of doors (2850 and 9550 Series), or an independent pair of doors (2860 and 9560 Series).
ANSI/BHMA A156.19 Compliance
The Senior Swing Power Operator System is a low energy product and must conform to the latest version of ANSI/BHMA A156.19
(American National Standard for Power Assist and Low Energy Power Operated Doors).
Installation Instructions
All installation instructions are valuable references and should be given to the building owner or maintenance supervisor after installation
is complete.
The Senior Swing Control Box installation instructions and the manufacturer’s instruction manual accompanying any sensor must be
referenced to ensure proper installation, setup, and operation.
2800 Overhead Consealed Series
9500 Surface Applied Series
Senior Swing
Control Box Installation Instructions
Terms of Use | Privacy Policy | DMCA Policy
2006-2023 Ready to Serve Manuals