Loading...
DSC260 Preliminary Owners Manual Revision 0.9
16
vs
-50.00
-45.00
-40.00
-35.00
-30.00
-25.00
-20.00
-15.00
-10.00
-5.000
0.0
AMPL(dBu)
20 100 1k 10k 20k
FREQ(Hz) vs
-35.00
-30.00
-25.00
-20.00
-15.00
-10.00
-5.000
AMPL(dBu)
100 1k 10k
FREQ(Hz)
Figure 10 Linkwitz-Riley 12, 24 and 48dB/Octave Slopes Figure 11 Butterworth 12, 18, 24 and 48dB/Octave Slopes
8.2 Low edge filter frequency: This control adjusts the cut off frequency of the selected Low Frequency Crossover. The range is from
15Hz to 16kHz in approximetly 1/6 Octave steps with “Out” at the bottom end and “Off” when adjusted beyond 16kHz.
Output 3 low edge frequency:
OUT 3 Lo/Mid
Lo Freq 220Hz
Note: If the Low edge filter frequency is raised beyond 16kHz, the channel output will be switched off. This is
different from Mute in that any signal assigned to this output will not indicate on the output meters. Output meter
deflection on unused outputs might confuse an operator.
8.3 High edge filter type: As with the Low edge filter frequency there are selections for Butterworth 12, 18, 24 or 48dB/Octave or Linkwitz-
Riley 12, 24 and 48dB/Octave. The various filter slopes are shown in Figures 10 and 11.
Output 3 high edge type:
OUT 3 Mid
Hi Shape L-R 48
8.4 High edge filter frequency: This control adjust the cut off frequency of the selected High Frequency Crossover. The range is from
15Hz to 16kHz in approximetly 1/6 Octave steps with “Out” beyond 16kHz.
Output 3 high edge frequency:
OUT 3 Mid
Hi Freq 2.0kHz
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com