Loading...
DSC260 Preliminary Owners Manual Revision 0.9
7
5.2 Device Configuration, selectable Mono, 2 channel x 3 way, 3 channel x 2 way. Changing this mode changes the overall routing and
linking of the unit. If the user changes this value, the user will have to confirm the selection as routing, linking, delay linking and
band name data will be changed. The unit will also mute to ensure that the user can check that the outputs have appropriate
bandwidth settings before continuing. The user can then move to the Output variables and change the routing, delay linking and
band names as required. Figure 7 shows the two standard configurations.
Switching to 2 channel x 3 way configuration will force Outputs 1,3 and 5 to be routed from Input A and Outputs 2, 4 and 6 to be
routed from Input B. All delay linking will be switched off and Stereo Link will be switched on. Band Names will be forced to ' Low',
'Mid', 'High', 'Low', 'Mid', 'High' for outputs 1 - 6 respectively. When only 2 way systems are used in stereo, outputs 3-6 are used
for Low (3-4) and High (5-6). This allows subwoofers to be added on outputs 1 and 2 without rewiring existing systems.
When using a derived center cluster feed such as in L, C, R, the configuration can be changed to a 3 channel 2-way
configuration where the center channel is a sum of A and B. This 3 channel x 2-way configuration will force Outputs 1 and 4 to
be routed from Input A and Outputs 3 and 6 to be routed from Input B. Outputs 2 and 5 will be routed from Input A+B. All delay
linking will be switched off and Stereo Link will be switched on. Band Names will be forced to 'Low' and ‘High'.
Switching to Mono configuration will force all Outputs to be routed from Input A. Delay linking will be switched off and Stereo
Linking will be switched off. Band Names will be forced to 'Band 1' through 'Band 6'.
Configuration:
UTILITIES
Config 3CH 2 way
To change configurations press the Plus and Minus parameter keys to select the desired configuration, mono, 3-way or 2-way.
This will call up the dialogue box below that will give you the question “Change to Mono?, 2-way or 3-way.
Change configuration?:
Change to 3 way?
Store to confirm
Pressing store will reconfigure the DSC260 to the desired set-up. Pressing any of the access keys will cancel the operation
and return you to the previous configuration.
2 Channel 3 Way Configuration 3 Channel 2 Way Configuration
Figure 7 Linking Relationships
5.3 Delay Units, selectable ms, ft and m: The delay units can be selected for the specific application in milliseconds, feet or meters. Use
Parameter Plus and Minus keys to select the preferred measurement units. Moving to a different position on the grid will
automatically store this parameter and recalculate the delay values for all displays.
Delay units:
UTILITIES
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com