135
D-108 Owner’s Manual (MIDI Implementation Chart/MMC List)
23 45: level status request
The command inquiring the present output level data of the
1~8 tracks. In D-108 as the level data is updated about every
40msec., inquiry in 40msec. units is effective.
When this command is received, D-108 will reply with "33 45
(<count=10><level data>)."
23 46: resolution status request
The command for inquiring the resolution on/off setup status.
When this command is received, this equipment replies with
"33 46 <on/off>."
23 47: midi sync out status request
The command for inquiring on status of the midi sync out
setup condition. When this command is received, this equip-
ment replies with "33 47 <midi sync>."
23 48: MTC offset mode status request
The command for inquiring the MTC offset mode setup status.
When this command is received, this equipment replies with
"33 48 <MTC offset mode>."
23 49: vari pitch status request
The command for inquiring status of vari pitch on/off and vari
pitch data. When this command is received, this equipment
replies with "33 49 (<count=3> <on/off> <vari data>)."
24 01 (<event number>): signature map request
The command for inquiring the meter setup. Order number
counting from the leading tune must be specified in the event
number (The first event is expressed as "event number=00."
When this command is received, this equipment replies with
"34 01(<signature map>)."
24 02 (<event number>): Tempo set map request
The command for inquiring tempo data. Order number from
the leading tune must be specified in the event number (The
first event is expressed as "event number=00."
When this command is received, this equipment replies with
"34 02 (<tempo set map>)."
24 04: preroll time status request
The command for inquiring the preroll time setup status.
When this command is received, this equipment replies with
"34 04 (<mmc time>)."
24 05: remain time request
The command for inquiring the disk remaining time which is
recordable. When this command is received, this equipment
replies with "34 05 (<mmc time>)."
24 06: frame rate status request
The command for inquiring the frame rate setup status.
When this command is received, this equipment replies with
"34 06 (<frame rate>)."
24 07: fs rate status request
The command for inquiring the fs (sampling frequency) setup
status. When this command is received, this equipment re-
plies with "34 07 (<fs rate>)."
24 08: time base status
The command for inquiring the setup status of the time base
shown in the display. When this command is received, this
equipment replies with "3408 (<time base>)."
Explanation on the Status Reply
32 21 (<loop op.mode>): loop operation mode status repry
This is the reply against the "22 21" loop operation status re-
quest command. <loop op.mode=12> is the only status data of
D-108 and any other setting is not permissible.
32 22 (<on/off>): loop on/off status reply
This is the reply against "22 22" loop on/off status request.
32 28 (<post locate mode>): post locate mode status reply
This is the reply against "22 28" post locate status request.
<post locate mode=12 or 15> is the only status data of D-108
and any other setting is not permissible.
32 2D (<edit message>): auto rec status reply
This is the reply against the "12 2D" auto rec command or the
"22 2D" auto rec status request.
32 41 (<lock status>): lock status repry
This is the reply against the "22 41" lock status request.
32 42 (<lock mode>): lock mode status reply
This the reply against the "22 42" lock mode status request.
32 45 (<edit message>): copy clip status reply
This is the reply against the "12 45" copy clip command or the
"22 45" copy clip status request.
32 46 (<edit message>): copy paste status reply
32 46 (<edit message><mmc time>): copy paste status reply
This is the reply against the "12 46" copy paste command or
the "22 46" copy paste status request. <mmc time> indicates
the unprocessed time until completion of copy paste editing.
32 47 (<edit message>): erase status reply
32 47 (<edit message><mmc time>): erase status reply
This is the reply against "12 47" erase command or "22 47"
erase status request.
32 49 (<edit message><count><mmc track>): clipboard play
status reply
This is the reply against the "12 49" clipboard play command.
If there is no sound data in the clipboard, "32 49"(<edit mes-
sage=14 (void data)>)" will be replied. <mmc track> indicates
the sound data track number.
32 4A (<edit message>): undo status reply
This is the reply against the "12 4A" undo command. Either
<edit message=01 (completed) or <edit message=14 (void
data)> will be replied.
32 4B (<edit message>): redo status reply
This is the reply against the "12 4B" redo command. Either
<edit message=01 (completed)> or <edit message=14 (void
data)> will be replied.
32 4D (<edit message>): move clip status reply
This is the reply against the "12 4D" move clip command or
"22 4D" move clip status request.
Terms of Use | Privacy Policy | DMCA Policy
2006-2022 Rsmanuals.com