Field Memory Recorder (Chapter 5: Recording/playback)
You can make setting in the quick setup mode by the procedure below.
How to make setting in the quick setup mode
FR-2LE FIELD MEMORY RECORDER
REWIND F FWD MARK
CONTRAST QUICK SET
MIC L MIC R
1) When the recorder is stopped, press the [MENU/ENTER] key while holding down the
The unit enters the quick setup mode and " " of " " starts flashing on the
This shows that the setting item is "ALC (Auto Level Control)". In this condition,
pressing the [+] or [-] key switches the flashing item in the following order.
2) Use the [+] or [-] key to select the desired setting item and press the [MENU/ENTER] key.
The current setting of the selected item starts flashing and you can now select the
For example, if you select " " and press the [MENU/ENTER] key, " " (the
default) starts flashing.
3) Use the [+] or [-] key to select the desired option and press the [MENU/ENTER] key.
The selected option is set, and " " now starts flashing.
To make setting of another item, repeat steps 2) and 3) above.
4) After you complete setting, press the [STOP/CANCEL] key to exit the quick setup mode.
See the following pages for details about each item.