Field Memory Recorder (Chapter 2: Before using the FR-2LE)
• When unformatted (or non-FAT32 formatted) card is set
The display shows the following warning message ("Illegal Format!").
When this message is shown, format the card with FAT32 by following the procedure
described in "Formatting a memory card" on page 27.
• When a card used by a PC, etc. is set
When loading a card which has been used with a PC, etc., the display also shows
"<<No Audio Files>>", as the screen example above. If any data is recorded on
the card, the remaining space which can be used for recording by the FR-2LE
may be smaller. Therefore, we recommend formatting the card using the "For-
mat" menu item on the "Disk" menu in the MENU mode. See "Formatting a memory
card" on page 86 for details.
• When a formatted card which has recorded audio data is set
The display shows the Home screen as below. The audio file recorded first (File 001)
is loaded and the current playback position is at the beginning of the file.
If the resume function of the current card is active, the current playback
position is at the point where the unit was turned off (or the card is ejected) last
time. When the resume function is inactive, the playback position is at the begin-
ning of the file.
You can select on/off of the resume function via the "Resume" menu item on the
"Disk" menu in the MENU mode (see page 90 for details).