20
●Selecting.the.battery.type.[BATTERY]
To display the status and alert regarding battery
condition correctly, set the “BATTERY” item in
the menu appropriately (see “Display for showing
battery status” on page 9).
1. While the recorder is stopped, press and hold
the [MENU] key for more than two seconds.
The unit enters the menu mode and a menu
item is shown on the display.
2. Press the [MENU] key as many times as re-
quired to select the “BATTERY” menu item.
M> BATTERY
> ALKALI
<Memo>: The long press of the [MENU] key chang-
es the menu item in reverse direction.
3. Use the [-/DOWN] or [+/UP] key to select the
battery type according to the batteries set in
the unit.
ALKALI: When alkaline batteries are set.
Ni-MH: When Ni-MH batteries are set.
4. To exit the menu mode, press the [EXIT] key.
●Selecting.the.infrared.controlled.device
. [IR.REMOTE]
To start or stop DSLR recording in sync with the
press of the REC key of the unit using infra-red
connection, set the “IR REMOTE” menu item ap-
propriately (see “Starting/stopping DSLR record-
ing in sync with the unit” on page 26).
1. While the recorder is stopped, press and hold
the [MENU] key for more than two seconds.
The unit enters the menu mode and a menu
item is shown on the display.
2. Press the [MENU] key as many times as re-
quired to select the “IR REMOTE” menu item.
M> IR REMOTE
> OFF
<Memo>: The long press of the [MENU] key chang-
es the menu item in reverse direction.
3. Use the [-/DOWN] or [+/UP] key to select either
of the following.
●OFF: The infrared remote control function is
disabled.
●Canon: The infrared remote control function for
a Canon DSLR is enabled.
The setting is effective immediately.
4. To exit the menu mode, press the [EXIT] key.
Using.menu
Menu.item.details
