18
Generating.the.record.end.tone.
. [ToneRec.End]
Before you stop recording, you can generate a 1
kHz tone three times with a 0.1 second interval
(see “Record end tone” on page 14).
You can select the timing of tone generating after
you press the record stop key.
The following shows how to select the record end
tone setting.
1. While the recorder is stopped, press and hold
the [MENU] key for more than two seconds.
The unit enters the menu mode and a menu
item is shown on the display.
2. Press the [MENU] key as many times as re-
quired to select the “ToneRec End” menu item.
 M>ToneRec End
>OFF
<Memo>: The long press of the [MENU] key chang-
es the menu item in reverse direction.
3. Use the [-/DOWN] or [+/UP] key to select the
setting from the following.
OFF (default): Immediately after you press the
record stop key, the recorder stops without
generating the tone.
ON (0s): Immediately after you press the record
stop key, the unit generates the tone, and then
the recorder stops.
ON (0.5s): 0.5 seconds after you press the re-
cord stop key, the unit generates the tone, and
then the recorder stops.
ON (1s): One second after you press the record
stop key, the unit generates the tone, and then
the recorder stops.
ON (1.5s): 1.5 seconds after you press the re-
cord stop key, the unit generates the tone, and
then the recorder stops.
ON (2s): 2 seconds after you press the record
stop key, the unit generates the tone, and then
the recorder stops.
ON (3s): 3 seconds after you press the record
stop key, the unit generates the tone, and then
the recorder stops.
The setting is effective immediately.
4. To exit the menu mode, press the [EXIT] key.
Selecting.the.record.stop.key
. [REC.STOP.KEY]
By default, the [REC] key is used to stop record-
ing, however, the [ ] key can be used to stop
recording by the following procedure (see “Set-
tings for recording” on page 13).
1. While the recorder is stopped, press and hold
the [MENU] key for more than two seconds.
The unit enters the menu mode and a menu
item is shown on the display.
2. Press the [MENU] key as many times as re-
quired to select the “REC STOP KEY” menu
item.
M> REC STOP KEY
> REC
<Memo>: The long press of the [MENU] key chang-
es the menu item in reverse direction.
3. Use the [-/DOWN] or [+/UP] key to select the
setting from the following.
REC (default): The [REC] key is used to stop
recording.
REC & STOP: The [REC] or [ ] key is used to
stop recording.
STOP: The [ ] key is used to stop recording.
The setting is effective immediately.
4. To exit the menu mode, press the [EXIT] key.
Using.menu
Menu.item.details
Terms of Use | Privacy Policy | DMCA Policy
2006-2022 Rsmanuals.com