CD-R/RW MASTER RECORDER CR500 (Preparation before using the CR500)
Connect the supplied power cable to the [AC IN] connector on the rear panel first, and
then to the AC outlet.
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS EQUIPMENT
TO RAIN OR MOISTURE.
UNBALANCED [-10dBV] BALANCED [+4dBu]
1:GND 2:HOT 3:COLD
ANALOG INPUT ANALOG OUTPUT
Realtime clock setting
After making power connection, turn on the CR500 and make setting of the realtime
Connect the CR500 to the AC outlet of the voltage indicated on the rear
panel. If you use the unit in another country where the power voltage or AC connec-
tor type is different, consult your dealer or local Fostex service station.
The realtime clock data is used for date/time of creation of an audio file which is
made when you make a recording to a BWF formatted CD-R/RW disc.
By default, the realtime clock is set according to local date/time of the factory. There-
fore, set the clock correctly according to your local date/time before using.
1) Press the [POWER] switch to turn on
Soon after turning on the power of the
unit, the display shows the screen below.
The time display shows "-m--s---ms",
showing that the CR500 started up with
no disc loaded on the drive.
2) Press the [ENTER/YES] key.
The unit enters the MENU mode and the
display now shows the MENU list screen
on which "SYS SETUP " is highlighted.
RECORD PLAY REWIND F FWD
symbol TUV WXYZ
space ABC DEF
GHI JKL MNO
MIN MAX MIN
PHONES INPUT LEVEL
3) While "SYS SETUP " is highlighted, press
the [ENTER/YES] key again.