CD-R/RW MASTER RECORDER CR500 (Overview)
• Various playback modes
The CR500 supports various playback modes described below.
(1) ALL PLAY mode
Plays back all disc tracks continuously.
(2) SINGLE PLAY mode
Plays back a single track.
(3) PROGRAM PLAY mode
Plays back tracks of the playback list you program.
(4) MEMORY PLAY mode
Plays back the memorized track by the instant start function.
• Supporting a wide range of Fs/Bit combinations for recording
When formatting a CD-R/RW disc to the BWF format, you can choose a
desired recording Fs/Bit combination from among the following.
A file is then recorded by the selected Fs/Bit combination to the disc. (Note
that a CD-DA formatted disc can only record 44.1kHz/16 bit tracks.)
(1) 44.1kHz/16 bit, (2) 44.1kHz/24 bit, (3) 48kHz/16 bit,
(4) 48kHz/24 bit, (5) 88.2kHz/24 bit, (6) 96kHz/24 bit
• Easy-to-see large display and level meters
From a 132 x 64 dot matrix LCD display, you can see the time information, as
well as the status of the unit setting. The dot-LED level meters (L and R) allow
you to check recording or playback levels precisely.
The meter peak hold time is set to three seconds by default, however, you
can set it between zero and nine seconds in one second steps using the “Peak
Hold” menu item of the “SYS SETUP” menu in the MENU mode (see page 77).
• High-performance CD-R/RW drive built in.
The CR500 is equipped with a high-performance CD-R/RW drive. The
anti-buffer-underrun function enables reliable stereo recording/playback.
MIN MAX MIN
PHONES INPUT LEVEL