90 TASCAM SS-R250N
13– Using the Remote Control Connectors
Using the RS-232C connector
Using the RS-232C connector (9-pin D-sub RS-232C standard)
on the back of the unit, this unit can be operated by a comput-
er or other external device by serial control. In addition, flash
starting by remote control is possible if a TASCAM RC-SS150 (sold
separately) is connected.
Select RS-232C on the REMOTE page to open the RS-232C screen.
(see “Menu operation procedures” on page 22)
Setting the transmission speed (baud rate)
Select BAUD RATE, and set the transmission speed (baud rate).
Options:
4800bps, 9600bps, 19200bps, 38400bps, 57600bps
(default)
Setting the parity bit
Select PARITY BIT, and set whether or not there is a parity bit.
Options: NONE (none, default value), EVEN (even), ODD (odd)
Setting the stop bit
Select STOP BIT, and set the stop bit.
Options: 1 (default), 2
Set the data length
Select DATA LENGTH, and set the data length.
Options: 7bit, 8bit (default)
NOTE
i The 9 pin of this unit's RS-232C connector is used to supply
12V power to the TASCAM RC-SS150 Do not use it to supply
power to any other device. The 9 pin of ordinary computer
RS-232C connectors is unused, so commercially-available RS-
232C cables can be used for connection.
i For information about this unit's RS-232C command protocol,
please contact the TASCAM customer support service.
Using a footswitch (TASCAM RC-3F)
You can use a TASCAM RC-3F footswitch (sold separately) con-
nected to the REMOTE jack on the front of this unit to control it.
TASCAM RC-3F
(sold separately)
Setting up the footswitch
1. Select RC-3F MODE on the REMOTE page to open the RC-
3F MODE screen.(see “Menu operation procedures” on page
22)
2. Select one of the three pedal assignment modes.
Option Meaning
MODE1 (default) This mode is optimal for recording min-
utes of meetings, for example.
MODE2 This mode provides basic transport
remote control.
MODE3 Use this mode for the pitch control func-
tion.
3. Confirm the setting and return to the Menu Screen.
Using the footswitch
Press the pedals of the footswitch to use the operations assigned
to them by the RC-3F MODE item.
Footswitch pedal assignments
MODE
Footswitch
L (press) C (press) R (press)
L (press and
hold) C (release) R (press and
hold)
1.PLAY /
mPAUSE/STOP ,
2.PLAY/PAUSE /
m--- ,
3
PITCH (−)
1% incre-
ments
PLAY/PAUSE
PITCH (+)
1% incre-
ments
--- --- ---
Terms of Use | Privacy Policy | DMCA Policy
2006-2022 Rsmanuals.com