82 TASCAM SS-R250N
11 – Network Functions
Setting the SNTP function
Use the SNTP page to make settings for automatically synchro-
nizing with the date and time of an Internet time server.
SNTP STATUS
This shows the current status of the SNTP function.
Message Status
SUCCESSFUL UPDATE The time was updated properly.
SUCCESS UPDATE(SKEW) A delay occurred, but the time was
updated.
STARTING UP The unit is preparing for operation.
ACCESSING SERVER The unit is connecting with a server.
DISABLED The SNTP function is disabled.
WAITING FOR NETWORK The unit is waiting to confirm the
network connection.
SERVER NAME NOT
FOUND
The server name could not be found
on the DNS server.
SERVER NAME FOUND The server name was found on the
DNS server.
SERVER CONNECT
FAILED The server has not responded.
REFUSING CONNECTIONS
Server responded, but is refusing ad-
ditional connections; select a different
SNTP server.
SNTP UPDATE
This shows the setting status of the MODE item on the SNTP UP-
DATE screen.
Select SNTP UPDATE, and open the SNTP UPDATE screen.(see
“Menu operation procedures” on page 22)
MODE item:
Set the SNTP function update mode.
Option Meaning
DISABLE (default) Do not use an SNTP function up-
date mode.
START UP
When the unit starts up, get the
time from an NTP server and use it
to set the built-in clock.
START UP/24CYCLE
Get the time from an NTP server
and use it to set the built-in clock
when the unit starts up, as well as
when the time set with the TIME
item occurs every 24 hours.
TIME item:
Set the time to acquire the time from the NTP server.
Options: 00:00 - 00:0923:00 - 23:09 (01:00 steps)
(default: 00:00 - 00:09)
NOTE
i When using the SNTP function, you must set the NETWORK 1
page DNS SETUP item and the NTP Server item, which is
explained below.
i On this screen, local time is set, not Coordinated Universal
Time (UTC).
i Since access to SNTP servers on the hour could result in con-
gestion, the unit will access the SNTP server randomly during
the first 10 minutes of the hour.
NTP SERVER
This shows the setting status of the NTP SERVER screen.
Select NTP SERVER, and open the NTP SERVER screen.(see “Menu
operation procedures” on page 22)
Edit the NTP server name, which must have no more than 32
characters (default: ntp.nict.jp).
For details about how to edit the text, seeEditing textpage 59.
NOTE
Press the MULTI JOG dial on PRESET5 to open a pull up
menu.
Turn the MULTI JOG dial to select a menu item, and press the
MULTI JOG dial to input the preset value of that item.
Press the MENU [JOG] button to close the pull-up menu.
Terms of Use | Privacy Policy | DMCA Policy
2006-2022 Rsmanuals.com