38 TASCAM SS-R250N
4 – Playback
Setting playback start timing
You can set the timing that playback starts when this unit is in
playback standby and a fader on an external controller is raised
from its lowest position (−∞).
1. Select FADER DELAY on the PLAY 3 page to open the FADER
START DELAY screen.(see “Menu operation procedures” on
page 22)
2. Set the playback start timing.
Range: OFF (default), 100msec, 200msec, 300msec
3. Confirm the setting and return to the Menu Screen.
Setting the sampling rate of output
audio
You can output audio using a set sampling rate regardless of the
sampling rates of the files.
1. Select the OUTPUT RATE item on the PLAY 3 page to open
the OUTPUT RATE screen.(see “Menu operation procedures”
on page 22)
2. Set the sampling rate used for output audio.
Option Meaning
AUTO (default) Use file sampling rates.
44.1kHz Convert to 44.1 kHz and output.
48kHz Convert to 48 kHz and output.
96kHz Convert to 96 kHz and output.
EXTERNAL
Use sampling rate synchronized to input
source clock.
When an analog input is selected, this
setting functions as AUTO.
NOTE
When set to EXTERNAL, if synchronization with the external
clock is not possible, file sampling rates will be used.
3. Confirm the setting and return to the Menu Screen.
NOTE
Audio output from an IF-DA2 (Dante) card will use the card's
operating sampling rate regardless of this setting.
Using the call function
The call function returns to the call point (last point playback
started from playback standby) and resumes playback standby.
When in playback standby, press the PAUSE [CALL] button to
return to the last point playback started and resume playback
standby.
The following actions will clear the call point.
0Turning the unit off
0Ejecting the current media
0Changing the playback area
0Changing the playback mode
0Changing the contents of the current media (by recording,
editing, deleting, etc.)
NOTE
i If the call point is not set, pressing the PAUSE [CALL] button
will cause a “ No Call Point ” pop-up warning message to
appear.
i You cannot use the call function when the playback mode is
set to PROGRAM or RANDOM.
Setting the call function
When in playback standby, press the PAUSE [CALL] button to
search for the call point and resume playback standby.
1. Select CALL on the PLAY 3 page to open the CALL FUNCTION
screen.(see “Menu operation procedures” on page 22)
2. Turn the call function on or off.
Options
DISABLE: Do not use call function
ENABLE (default): Use call function
NOTE
If the CALL FUNCTION screen setting is DISABLE, the unit will
not search for call points.
3. Confirm the setting and return to the Menu Screen.
Terms of Use | Privacy Policy | DMCA Policy
2006-2022 Rsmanuals.com