TASCAM SS-R250N 23
3 – Preparation
Making connections
This is an example of SS-R250N connections.
Precautions before making connections
0Carefully read the operation manuals of the devices to be connected and then connect them correctly.
0Before making connections, turn this unit and all equipment to be connected off (standby).
0Install all connected devices, including this unit, so that they are powered from the same line. When using a power strip or similar
device, be sure to use one that has high current capacity (thick cable) in order to minimize fluctuations in power voltage.
ANALOG IN
(BALANCED)
LR
ANALOG
IN
(UNBALANCED)
LR
ANALOG
OUT
(UNBALANCED)
LR
AES/EBU
IN OUT DIGITAL
IN
(S/PDIF)
DIGITAL
OUT
(S/PDIF)
TASCAM RC-3F (sold separately) Headphones
Mixer, recorder, amp, etc. Digital mixer, digital
recorder, digital amp,
etc.
TASCAM RC-20
(sold separately)
TASCAM RC-SS20 (sold sepa-
rately)
TASCAM RC-SS150 (sold separately)
or computer RS-232C port
Microphones
(or mixer, recorder, amp, etc.)
Network with FTP server, con-
trol computer, etc.
Optional card (sold sepa-
rately)
Examples of connections to a SS-R250N
Terms of Use | Privacy Policy | DMCA Policy
2006-2022 Rsmanuals.com