18 TASCAM SS-R250N
2 – Names and Functions of Parts
The Recording Screen has four display modes: TRACK, TOTAL,
TITLE and FOLDER.
Each time you press the HOME [INFO] button, the display mode
Recording Screen TRACK display mode
Recording Screen TOTAL display mode
Recording Screen TITLE display mode
Recording Screen FOLDER display mode
1 Input levels
The input sound levels are shown.
2 Elapsed track recording time
This shows the elapsed time of the recorded file (hours: min-
3 Remaining track recording time
This shows the remaining time (hours: minutes: seconds) for
the maximum file size (2 GB).
4 File type
This shows the current recording file format.
When dual format recording is on, two file formats are shown
like .(see “Making recording format settings” on
5 Display mode
This shows the current Home Screen display mode.
6 Track number
This shows the number of the track currently being recorded.
7 Track recording position
The current recording position is shown by a bar. As record-
ing progresses, the bar extends from the left.
8 Recording function activation status
Icons appear for the recording functions that are currently on.
Appears when the dynamics function LIMITER is
Appears when the dynamics function COMP_SOFT
Appears when the dynamics function COMP_HARD
Appears when the automatic gain control function
Appears when the sampling rate converter is on
Appears when the sync recording function is on
Appears when the automatic track incrementation
function is on
Appears when the automatic mark function is on
9 Current medium
This shows the name of the currently selected medium.
When the relay recording function is on, an icon like
will appear that shows the current medium and the next me-
dium to be used for recording.(see “Making recording format
settings” on page 57)
When the backup function is on, an icon like will
appear that shows the two types of media used for recording.
(see “Making recording format settings” on page 57)
0 Track title
This shows the title of the track being recorded.
q Phantom power supply status
When phantom power is on, the icon appears.(see “Set-
ting phantom power” on page 55)
w Low-cut filter setting status
When the low-cut filter is set, the icon appears.(see “Setting
the low-cut filter” on page 56)
e Timer event setting status
The icon appears when the timer event function is on.(see
“Turning the timer event function on/off” on page 69)