14 TASCAM SS-R250N
2 – Names and Functions of Parts
o PAUSE [CALL] button and indicator
i Press when stopped or playing back to start playback
standby.
i Press when recording to start recording standby.
i This button lights when in playback standby or recording
standby.
i This button blinks during jog playback.
i When in playback standby, press this button to search for
the call point (last point playback started from playback
standby) and resume playback standby.(see “Using the call
function” on page 38)
p RECORD [TRK INC] button and indicator
i Press when stopped to start recording standby.
i When recording, press to divide the recording by creating a
new file (increment the track number).
i This button lights when recording or in recording standby.
i If the currently-selected medium is not loaded, pressing
this button starts input monitoring and the selected input
signal will be output. This button blinks during input moni-
toring.
Rear panel
a MIC/LINE IN (BALANCED) L/R jacks
These are balanced XLR analog input jacks.
i The nominal input level can be set to either +4 dBu (de-
fault) or +6 dBu. (1: GND, 2: HOT, 3: COLD),(see “Setting the
reference level” on page 84)
i By changing the input sensitivity, you can use these as mic
inputs.
(see “Setting mic/line input sensitivity” on page 54)
s ANALOG IN (UNBALANCED) L/R jacks
These are analog RCA pin input jacks.
The nominal input level is -10 dBV.
d ANALOG OUT (UNBALANCED) L/R jacks
These are analog RCA pin output jacks.
The nominal output level is -10 dBV.
f ANALOG OUT (BALANCED) L/R jacks
These are balanced XLR analog output jacks.
The nominal output level can be set to either +4 dBu (default)
or +6 dBu. (1: GND, 2: HOT, 3: COLD) (see “Setting the refer-
ence level” on page 84)
g AES/EBU IN jack
This is a balanced XLR AES3-2003/IEC60958-4 (AES/EBU) format
digital audio input jack.
A sampling rate converter that supports 32–192 kHz is built-
in.(see “Using the sampling rate converter” on page 60)
To link a second SS-R250N, connect the AES/EBU OUT jack on
the other unit to this jack.(see “Making connections for link
playback” on page 39)
h AES/EBU OUT jack
This is a balanced XLR AES3-2003/IEC60958-4 (AES/EBU) format
digital audio output jack.
To link a second SS-R250N, connect the AES/EBU IN jack on
the other unit to this jack.(see “Making connections for link
playback” on page 39)
j SPDIF IN jack
This is a digital audio input jack.
A sampling rate converter that supports 32–192 kHz is built-
in.(see “Using the sampling rate converter” on page 60)
To link a second SS-R250N, connect the SPDIF OUT jack on
the other unit to this jack.(see “Making connections for link
playback” on page 39)
k SPDIF OUT jack
This is a digital audio output jack.
Signals can be output in IEC60958-3 (S/PDIF) format.
To link a second SS-R250N, connect the SPDIF IN jack on
the other unit to this jack.(see “Making connections for link
playback” on page 39)
l RS-232C connector
This is a 9-pin D-sub RS-422 control input/output connector.
Connect a TASCAM RC-SS150 remote control or personal
computer, for example, here.(see “Using the RS-232C connec-
tor” on page 90)
; PARALLEL connector
This is a 25-pin D-sub parallel control input/output connector.
Connect a TASCAM RC-SS20 or other external controller here.
z ETHERNET port
This is an Ethernet port. Use this to connect to a network,
transfer files and control the unit externally.
x OPTION slot
Use this slot to install an I/O card (sold separately).
c AC IN connector
Plug the included power cord in here.
Terms of Use | Privacy Policy | DMCA Policy
2006-2022 Rsmanuals.com