1 – Introduction
0TASCAM is a registered trademark of TEAC Corporation.
0SDXC Logo is a trademark of SD-3C, LLC.
0MPEG Layer-3 audio coding technology licensed from Fraun-
hofer IIS and Thomson.
0Supply of this product does not convey a license nor imply
any right to distribute MPEG Layer-3 compliant content
created with this product in revenue-generating broadcast
systems (terrestrial, satellite, cable and/or other distribution
channels), streaming applications (via Internet, intranets
and/or other networks), other content distribution systems
(pay-audio or audio-on-demand applications and the like) or
on physical media (compact discs, digital versatile discs, semi-
conductor chips, hard drives, memory cards and the like).
An independent license for such use is required. For details,
please visit http://mp3licensing.com.
0Other company names, product names and logos in this doc-
ument are the trademarks or registered trademarks of their
respective owners.
Information is given about products in this manual only
for the purpose of example and does not indicate any
guarantees against infringements of third-party intel-
lectual property rights and other rights related to them.
TEAC Corporation will bear no responsibility for infringe-
ments on third-party intellectual property rights or their
occurrence because of the use of these products.
With the exception of personal enjoyment and similar
uses, copyrighted materials belonging to third parties
cannot be used without permission from the rights
holders in accordance with copyright law. Please use the
equipment appropriately.
TEAC Corporation will bear no responsibility for rights
infringements committed by users of this product.
Precautions for placement and use
0The operating temperature range of this unit is 5–35 °C.
0Do not install this unit in the following types of locations. Do-
ing so could make the sound quality worse or cause malfunc-
Locations with frequent vibrations
Near windows or other places exposed to direct sunlight
Near heaters or other extremely hot places
Extremely cold places
Very humid or poorly ventilated places
Very dusty places
0To enable good heat dissipation, do not place anything on
top of the unit.
0Do not place the unit on top of a power amplifier or other
device that generates heat.
0To mount this unit in a rack, use the included rackmount
screw kit and mount it as shown in the illustration below.
Leave at least 1U of space open above it in the rack.
Notes about power supplies
0Insert the included power cord all the way into the AC IN
0Do not connect a power supply other than one that is
AC100V (50-60Hz).
0Hold the power cord by its plug when connecting or discon-
necting it.
Beware of condensation
Condensation could occur if the unit is moved from a cold place
to a warm place, it is used immediately after a cold room has
been heated or it is otherwise exposed to a sudden temperature
change. To prevent this, or if this occurs, let the unit sit for one or
two hours at the new room temperature before using it.
Cleaning the unit
Use a dry soft cloth to wipe the unit clean. Do not wipe with
chemical cleaning cloths, thinner, alcohol or other chemical
agents. Doing so could damage the surface or cause discolor-
Terms of Use | Privacy Policy | DMCA Policy
2006-2023 Ready to Serve Manuals