TASCAM DR-07X 51
11 – USB Connections
Setting the connected device type
1. When the AUDIO I/F screen is open, use the + or –
button to select (highlight) the CONNECT TO menu item,
and press the 7 button.
2. Use the + and – buttons to set the type of connected
device.
Options: PC/Mac(default), iOS
NOTE
iIf the connected device type is iOS, this unit will operate
on batteries.
iAn iPad Camera Connection Kit is necessary to connect an
iOS device.
Connecting
1. When the AUDIO I/F screen is open, use the + or –
button to select (highlight) the CONNECT menu item, and
press the 7 button.
2. Press the 7 button to enable audio interface mode and
return to the Home Screen.
NOTE
When in audio interface mode, press the MENU button to
access the following functions.
iMONITOR: Set to DIRECT to mix the mic input and
computer output sounds, enabling input
monitoring without lag.
iMIC POWER: When connecting a microphone that
requires plug-in power, set this to ON.
iLOW CUT: Set the cutoff frequency of the low-cut filter
during input.
iEFFECT: Open the effect settings screen.
iDISCONNECT: End the USB audio interface mode
connection.
Terms of Use | Privacy Policy | DMCA Policy
2006-2022 Rsmanuals.com