TASCAM DR-07X 19
3 – Preparation
CAUTION
Set the built-in stereo mic to setting to L-R.
When using the built-in stereo microphone in an open
state and the left-right setting is not L-R, appears as
light on dark on the Home Screen. (see "Adding marks
manually" on page 46)
Setting the mics to record a clear stereo
sound (X-Y position)
Close the mics (X-Y position).
This setting enables recording with a clear stereo field and
less phase difference.
If you open or close the microphone pair while using the
built-in stereo microphone and the left-right setting does not
suit the angle of the microphone, a pop-up message appears
to ask whether you want to change the mic left-right setting.
(see "File information page (FILE)" on page 52)
CAUTION
Set the built-in stereo mic to setting to R-L.
When using the built-in stereo microphone in a closed
state and the left-right setting is not R-L, appears as
light on dark on the Home Screen. (see "Adding marks
manually" on page 46)
Swapping the left-right channels of the
built-in microphone pair
Swap the left and right mics according on the mic angle
setting.
When the microphone pair is open, the left mic should be
set to the left channel and the right mic should be set to the
right channel (A-B position: L-R). When the microphone pair
is closed, the left mic should be set to the right channel and
the right mic should be set to the left channel (X-Y position:
R-L).
When using the built-in stereo microphone and this setting is
not set, appears as light on dark on the Home Screen.
1. Press the RECORD [0] button to begin recording
standby.
The REC indicator flashes red and the recording screen
opens.
2. Press the QUICK button.
The Quick menu will open.
3. Use the + or − button to select (highlight) MIC LR SWAP,
and press the 7 button.
The L-R swap pop-up screen will open.
4. Use the + button or – button to select (highlight) L-R or
R-L according to the MIC pair angle.
5. Press the 7 button to fix the setting, and to return to
the Home Screen.
Microphone position detection
The following pop-up message appears automatically
whenever the built-in stereo mic is opened or closed and the
left-right channel setting does not suit the mic angle.
Press the / button to change the setting.
Press the . button to leave the setting as it is.
NOTE
iThis screen appears automatically when the left mic is
opened or closed. If only the right microphone is opened
or closed, it does not appear.
iWhen you change the microphone angle setting and the
pop-up message appears, you must press the / button
to change the L-R setting, press the . (HOME) [8]
button to keep this setting as is, or restore the previous
microphone angle to close the pop-up message before
you can begin recording.
iThe pop-up message does not appear if you change the
microphone position when recording. If necessary, use
the MIC LR SWAP setting by pressing the QUICK button
to switch the setting after change the setting to recording
standby mode by pressing the RECORD [0] button. (see
"Swapping the left-right channels of the built-in micro-
phone pair" on page 19)
Terms of Use | Privacy Policy | DMCA Policy
2006-2022 Rsmanuals.com