TASCAM SD-20M 39
11 – Specifications
Ratings
8Recording media
SD card (64 MB−2 GB)
SDHC card (4 GB−32 GB)
SDXC card (48 GB−128GB)
8Recording/playback formats
BWF: 44.1/48/96kHz, 16/24 bit
WAV: 44.1/48/96kHz, 16/24-bit
MP3: 44.1/48 kHz, 32/64/96/128/192/256/320 kbps
8Number of channels
4 channels (stereo × 2)
Input/output ratings
Analog audio input and output ratings
8MIC/LINE INPUT 1/2 jacks (balanced, only XLR
support phantom power)
Connectors
XLR-3-31 (1: GND, 2: HOT, 3: COLD)
6.3mm (1/4") standard TRS jacks (Tip: HOT, Ring: COLD,
Sleeve: GND)
Set to MIC (support phantom power)
Input impedance: 2.7 kΩ
Maximum input level: 0 dBu (Gain: LOW)
Minimum input level: −67 dBu (Gain: HIGH)
Set to LINE
Input impedance: 10 kΩ or more
Nominal input level: +4 dBu
Maximum input level: +20 dBu
Minimum input level: −12 dBu
8INPUT 3/L and 4/R jacks (UNBALANCED)
Connectors: RCA pin jacks
Input impedance: 10 kΩ or more
Nominal input level: −10 dBV
Maximum input level: +6 dBV
Minimum input level: -26 dBV
8OUTPUT jacks
Connectors: RCA pin jacks
Nominal output level: −10 dBV
Maximum output level: +6 dBV
Output impedance: 200 Ω
8PHONES jack
Connector: 6.3mm (1/4") standard stereo jack
Maximum output: 20 mW + 20 mW (when into 32 Ω,
distortion 0.1%)
Control input/output
8REMOTE jack
Connector: 2.5mm TRS jack
Audio performance
8Frequency response
20-20 kHz +1/−3 dB
(INPUT 1-2 to OUTPUT, Fs 44.1/48kHz, JEITA*)
20-40 kHz +1/−3 dB
(INPUT 1-2 to OUTPUT, Fs 96kHz, JEITA*)
8Distortion
0.01% or less (INPUT 1-2 to OUTPUT, Fs 44.1/48/96kHz,
JEITA*)
8S/N ratio
100 dB or more (INPUT 1-2 to OUTPUT, Fs 44.1/48/96kHz,
JEITA*)
*Based on JEITA CP-2150
General
8Power
Dedicated AC adapter (TASCAM PS-P1220E) × 1
4 AA batteries (alkaline, NiMH or lithium)
8Power consumption
5 W (maximum)
8Current consumption
1 A (maximum)
Terms of Use | Privacy Policy | DMCA Policy
2006-2022 Rsmanuals.com