94 TASCAM DR-60D
13 – Troubleshooting
If you are having trouble with the operation of this unit, please try the following before seeking repair. If these measures do not solve the
problem, please contact the store where you bought the unit, an authorized distributor or a TASCAM Customer Support (see the back cover
for details).
8Power will not turn ON.
Confirm that the batteries are not dead.
Confirm that the batteries are installed with the correct ¥/^
orientation.
Confirm that the TASCAM PS-P515U AC adaptor (sold separately)
is firmly connected to both the socket and the unit.
Confirm that the USB cable (if used for USB bus power supply) is
firmly connected.
Confirm that the USB cable (if used for USB bus power supply) is
not connected via a USB hub.
8The unit does not function.
Confirm that the HOLD switch is not set in the direction of the
arrow.
Is the unit connected to a PC with the USB cable? (Is USB
connected shown on the display?)
8The SD card is not recognized.
Confirm that the SD card is inserted completely.
8Playback does not work.
Confirm that the sampling frequency of the WAV file is supported
by this unit.
8No sound is output.
Is the monitoring system connected correctly?
Is the volume of the monitoring system minimized?
Is the OUTPUT LEVEL setting of the unit minimized?
8Recording does not work.
If you are using an external device, check the connection again.
Check the input settings again.
Confirm that the input level is not too low.
Confirm that the SD card is not full.
Confirm that the number of files has not reached the maximum
that the unit can handle.
8The input level is low.
Confirm that the input level setting is not too low.
Confirm that the output level of a connected external device is
not too low.
8The source I am trying to record sounds distorted.
Is the input level set too high?
8The playback sounds unnatural.
Check the playback equalizer setting.
Is the level align function active?
Terms of Use | Privacy Policy | DMCA Policy
2006-2023 Rsmanuals.com