TASCAM DR-60D 9
Quick Start Guide
In this chapter we will try recording and playback with the TASCAM
DR-60D. We will also try using it connected to a digital single-lens
reflex (DSLR) camera.
The default recording format is set to 16-bit/44.1kHz WAV when
shipped from the factory.
Higher-quality files can be produced by changing the recording
format. See “Selecting file format, sampling frequency, and
maximum file size” on page 42 for details.
1. Install batteries in the battery compartment on the back
of the unit. Fit them to the ¥ and ^ marks shown in the
2. Insert an SD card into the SD card slot on the right side of the
3. Press and hold the ¤ button on the right side of the unit until
” startup screen appears.
Start -Up Screen