30 TASCAM DR-60D
2 – Names and functions of parts
4. Turn the DATA dial or / button to move the cursor to
highlight the value of the setting.
5. Turn the DATA dial to change the setting.
6. Press the DATA dial or . button to set a different item in the
This enables you to select a new item. Turn the DATA dial again
to select an item to be set.
7. Repeat step 3 to 6 as necessary to set each item.
8. To open the
submenu screen), press
the MENU button.
To return to the Home Screen, press the Stop (8) [HOME]
Use the following buttons to operate the various screens.
Stop (8) [HOME] button:
When any other screen is open, press this to return to the Home
Screen. Use this to answer “NO” to a confirmation message.
Turn the DATA dial to select items and change values on setting
screens. You can also turn the DATA dial to change the file
Press the DATA dial to confirm items selected on setting screens
and to answer “Yes” to confirmation pop-up messages.
Press the DATA dial during recording to add a mark manually.
(See“Adding marks manually to a recording” on page 59.)
While pressing and holding the data dial, press the . button
to jump to the previous mark or press the / button to jump
to the next mark. (See “Moving to a mark position” on page 59.)
Use this to move the cursor (the highlighted area) to the right on
the screen, and to open folders on the
Use this to move the cursor (the highlighted area) to the left on
the screen, and to close folders on the