16. Reset the print server to have the changes take effect.
NOTE: The print server may require up to a minute after
power-up to log into a NetWare Directory Services context
because of the large number of calculations NDS security requires.
Your print server should now be ready for use by workstation
users. You should be able to redirect printing to your print server
using a CAPTURE command. Configuring in Remote Printer Mode
This remote printer feature is not available for our 10/100Mbps 3-
port models. Make sure that you have created the NetWare print
server with Type Remote using the PCONSOLE utility before you
configure the print server. For more detailed information about
PCONSOLE, please refer to NetWare‘s manual. You can set up
the NetWare print server, print queue and printer objects by
following the steps below:
1. Run the NetWare PCONSOLE program.
2. Change the current context, if necessary, using the Change
Context menu selection.
3. Choose Quick Setup from the menu.
Terms of Use | Privacy Policy | DMCA Policy
2006-2023 Ready to Serve Manuals