The print server will verify your password (it will ignore the User
Name item) when you save your configuration.
Make sure to reset the print server (described in section 8.3.11
System Utilities) to let the changes take effect.
8.3.7 Setting IP Address
The IP Cfg page allows you to configure the IP address of the HPS1P.
The print server will obtain its IP address automatically through the
following protocols: DHCP, BOOTP, RARP as long as you configure
the IP address with the “auto” option enabled. Click on “Save” to
write the configuration information to the HPS1P print server.
The HPS1P will verify your password (it will ignore the User Name
item) when you save the configuration. Make sure to reset the print
server (described in section 8.3.11 System Utilities ) to apply the
changes.
8.3.8 Configuring DHCP Parameters
The HPS1P can be configured as a DHCP server to provide dynamic
IP addresses assignments. The DHCP Cfg page allows you to set the
following:
Terms of Use | Privacy Policy | DMCA Policy
2006-2022 Rsmanuals.com