Loading...
7
Ordercode: 50825
TR-512
Data Cabling
To link fixtures together you must obtain data cables. You can purchase DAP Audio certified DMX cables
directly from a dealer/distributor or construct your own cable. If you choose to create your own cable
please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic
interference.
DAP Audio DMX Data Cables
DAP Audio Basic microphone cable for allround use. bal. XLR/M 3-pin > XLR/F 3-pin. Ordercode
FL01150 (1,5 m), FL013 (3 m), FL016 (6 m), FL0110 (10 m), FL0115 (15 m), FL0120 (20 m).
DAP Audio X-type data cable XLR/M 3-pin > XLR/F 3-pin. Ordercode FLX0175 (0,75 m),
FLX01150 (1,5 m), FLX013 (3 m), FLX016 (6 m), FLX0110 (10 m).
DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®. Ordercode FL71150 (1,5 m), FL713 (3 m), FL716 (6 m), FL7110 (10 m).
DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®. Ordercode FL7275 (0,75 m), FL72150 (1,5 m), FL723 (3 m), FL726 (6 m), FL7210 (10 m).
DAP Audio 110 Ohm cable with digital signal transmission. Ordercode FL0975 (0,75 m),
FL09150 (1,5 m), FL093 (3 m), FL096 (6 m), FL0910 (10 m), FL0915 (15 m), FL0920 (20 m).
DAP Audio data cable FL08 DMX/AES-EBU, XLR/M 5-pin > XLR/F 5-pin. Ordercode FL08150 (1,5 m),
FL083 (3 m), FL086 (6 m), FL0810 (10 m), FL0820 (20 m).
DAP Audio DMX adapter: 5-pin/3-pin. Ordercode FLA29.
DAP Audio DMX adapter: 3-pin/5-pin. Ordercode FLA30.
Control Panel
A) LCD display
B) Record/Play LED indicator
C) DMX IN/Trigger LED indicator
D) SD activity LED indicator
E) Power LED indicator
F) MENU button
G) UP button
H) DOWN button
I) ENTER button
Fig. 03
Control Mode
The TR-512 is connected to the controller and responds to the DMX signal from the controller.
Controlling:
You can operate the TR-512 via your light controller.
Note: After switching on, the TR-512 will automatically detect whether DMX-512 data is received or not. If
there is no data received at the DMX-input, the “LED “ on the control panel will not flash.
If not, the problem may be:
The XLR cable from the controller is not connected with the input of the TR-512.
The controller is switched off or defective, the cable or connector is detective, or the signal wires are
swapped in the input connector.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com