Loading...
17
Ordercode: 50825
TR-512
RJ45 Connector
Please follow the instructions below in order to create an RJ45 trigger connector.
Fig. 04
It is possible to use each of the 4 modes (NO_TR, NC_TR, TOGGLE_TR, AUTO_TR) independently, for
separate triggers (1-6). Make sure that your settings are correct (see 4.4, page 12).
Maintenance
The Showtec TR-512 requires almost no maintenance. However, you should keep the unit clean.
Disconnect the mains power supply and then wipe the cover with a damp cloth. Do not use alcohol or
solvents. Do not immerse in liquid. Keep connections clean. Disconnect electric power, and then wipe
the DMX connections with a damp cloth. Make sure connections are thoroughly dry before linking
equipment or supplying electric power.
The operator has to make sure that safety-related and machine-technical installations are to be
inspected by an expert after every year in the course of an acceptance test.
The operator has to make sure that safety-related and machine-technical installations are to be
inspected by a skilled person once a year.
The following points have to be considered during the inspection:
01) All screws used for installing the device or parts of the device have to be tightly connected and must
not be corroded.
02) There may not be any deformations on housings, fixations and installation spots.
03) The electric power supply cables must not show any damages or material fatigue.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com