Loading...
15
Ordercode: 42651
Club Par 12-6 RGBWAUV
11. Amber
With this menu, you can manually adjust the intensity of the amber LEDs.
01) Press the MODE button until the display shows .
02) Press the SETUP button to open the submenu, then press the UP/DOWN buttons to adjust the intensity
of the amber LEDs. Adjustment range is between 0-255, from low to high intensity.
12. White
With this menu, you can manually adjust the intensity of the white LEDs.
03) Press the MODE button until the display shows .
04) Press the SETUP button to open the submenu, then press the UP/DOWN buttons to adjust the intensity
of the white LEDs. Adjustment range is between 0-255, from low to high intensity.
13. UV
With this menu, you can manually adjust the intensity of the UV LEDs.
05) Press the MODE button until the display shows .
06) Press the SETUP button to open the submenu, then press the UP/DOWN buttons to adjust the intensity
of the UV LEDs. Adjustment range is between 0-255, from low to high intensity.
14. Node
With this menu, you can set the dimmer curve of your Club Par.
01) Press the MODE button until the display shows .
02) Press the SETUP button to open the submenu, then press the UP/DOWN buttons to toggle between
one of the 5 dimmer curves from fast to slow: .
03) is linear, is from (1 sec- 4 sec. dimming curve).
modes always override Channel 11
15. LED Display
With this menu you can set the LED Display On or Off.
01) Press the MODE button until the display shows .
02) Press Setup to enter the LED Display Menu. You can choose 2 different settings.
03) Use the Up / Down buttons to select:
: The LED display will light all the time.
: The LED display will turn off after 30 seconds.
16. Temperature
With this menu, you can see what the current temperature of the LEDs is.
01) Press the MODE button until the display shows .
02) Press the SETUP button to open the submenu, you will see the current temperature .
17. Version
With this menu, you can see what version software your Club Par has.
01) Press the MODE button until the display shows .
02) Press the SETUP button to open the submenu, you will see the current version .
18. Reset
With this menu, you can see reset your Club Par.
01) Press the MODE button until the display shows .
02) Press the SETUP button to open the submenu, then press the UP/DOWN buttons to select
.
03) Press the SETUP button to confirm your choice.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com