Loading...
E-11E-10
English
NOTE
e CR902 is a multi-device remote, therefore key
functions will dier according to the last input
button pressed.
Please ensure “CD” button is selected prior to
controlling the CDS27.
settings
menus
Navigating the menus
e CDS27 menus can be navigated by using the cursor
(arrow) keys on the remote control.
1. Use the B and C keys to navigate up and
down the current menu.
2. With the main section you require displayed,
press OK to select it.
3. Use the B and C keys to navigate up and
down the options.
4. Pressing E selects a setting: use the B and C
keys to change the setting.
5. Press OK to conrm the setting. Go back to step 4
to adjust any other settings in the current section.
6. Press < to return to the previous screen if you
want to select another section to adjust.
Firmware Update – You can check for an upgrade to
your player’s rmware by selecting this menu item and
pressing OK to highlight ‘Network’, then press OK again.
A message appears if no new rmware is available,
otherwise follow the on-screen instructions.
Load Defaults – Press OK with this item highlighted to
reset all settings to factory defaults.
You are asked to conrm that you want to load the
factory default settings. Select “cancel” to exit or ' to
highlight the “yes” option and OK to conrm.
System Information – Use the '/, cursor keys to
browses through options.
e System Information panel shows information
about your player, such as the IP address and rmware
version.
Network Audio - Allows the user to enable or disable
the UPNP rendering capability of the player. Setting
this option to ‘o’ will disable network audio.
Digital Output - Allows the user to limit the sample rate
of the coax/optical digital output.
Network Standby – is item determines whether
network features are available when the CDS27 is in
standby.
Selecting “ACTIVE” will maintain the network
connection (required for IP control).
Selecting “STANDBY” willl allow the network
hardware to be powered down in order to reduce power
consumption.
Network Setup– is item allows the user to congure
the unit to join an existing network, required for
network audio playback and over the internet soware
updates.
Auto Standby – Allows user to speciy the period of
inactivity aer which the unit will automatically enter
standby. e options are: 5/10/15/20/25/30 Minutes.
Disc Auto Playback – controls whether an optical disc
(e.g. CD) will play automatically aer it is inserted.
< On: Optical discs will play automatically.
< Of: play must be pressed to play a disc.
e Settings menu allows you to congure all aspects
of your CDS27. is section will go through the menu
items and explain their function.
e only way to view the Settings menu is on the
CDS27 display screen.
Entering the settings menu
If the home menu is not currently displayed, press
MENU on the remote control to display it.
Press C until the SETTINGS MENU item is displayed
and and press OK to enter.
AMP Device Mode
e A Device Mode button congures the CR902 to
control your Arcam amplier. Pressing this button does
not aect the currently selected input on the amplier.
PToggles power between standby and on
DISP Cycles through the front panel display’s
brightness options
MODE Cycles through the display modes on the
front panel
MENU Displays the amplier setup menu on the
front panel
Navigate menus
O conrms a selection
@Toggles the mute function of the amplier
Vol-
Vol+
Vol +/– adjusts the volume of an Arcam
amplier up or down.
Press the MUTE button once to mute an
Arcam amplier. Press again (or use Vol +/–)
to un- mute.
SP1 Toggles Speaker 1 output
SP2 Toggles Speaker 2 output
BAL Adjusts the balance between the le and
right audio channel
TUN Device Mode
e T Device Mode button congures the CR902 to
control the tuner functions of Arcam tuners.
PToggles power between standby and on
09e numeric keys are used to store and
recall presets
DISP Cycles through the front panel display’s
brightness options
INFO Cycle through dierent information
display modes
)Rewind iPod
(Fast forward iPod
]Preset down/Sirius category down/iPod
track back
[Preset up/Sirius category up/iPod track
forward
#Stop iPod
$Play/pause iPod
&Play/pause iPod
MENU Displays the tuner setup menu on the front
panel
' , Preset up/down, iPod track back/forward
< > Decrement/increment tuning frequency
OConrm a selection
FM MONO Toggle FM mode between mono and
stereo reception
P/TUNE Enter/Exit Preset recall mode
STORE Enter/Exit Preset store mode
BAND Cycles through available tuner bands
CD Device Mode
e c Device Mode button congures the CR902 to
control the CD functions of Arcam CD players.
PToggles power between standby and on
!Open/close disc tray
09
e numeric keys allow direct access to
individual tracks on a disc. To select a track
press the corresponding keypad button.
For tracks greater than 9, enter the digits
in sequence. For example, to play track 15,
press 1, then press 5.
DISP Cycles through the front panel display’s
brightness options
MODE Changes the available display modes on the
CD player
)Fast rewind
(Fast forward
]Skip back to the start of the current/
previous track
[Skip forwards to the start of the next track
#Stop playback
$Play
&Toggles pause of playback
Navigates track listings if supported by the
player
O selects the currently highlighted track if
supported by the player
SHUFF Toggles random (‘shue’) play on and o
RPT
Repeat track will cause the current track
to be played once the end of that track has
been reached.
Repeat all will repeat the current section
of tracks once the end of the nal track has
been removed.
To repeat a particular track, select that
track and press RPT twice. To cancel, press
RPT a third time
BD Device Mode
e Device Mode button congures the CR902 to
control the BD functions of Arcam BD players.
PToggles power between standby and on
!Open/close disc tray
09
e numeric keys allow direct access to
individual tracks on a disc. To select a track
press the corresponding keypad button.
For tracks greater than 9, enter the digits
in sequence. For example, to play track 15,
press 1, then press 5.
DISP Cycles through the front panel display’s
brightness options
MODE Changes the available display modes on the
BD player
)Fast rewind
(Fast forward
]Skip back to the start of the current/
previous track
[Skip forwards to the start of the next track
#Stop playback
$Play
&Toggles pause of playback
AUDIO Changes audio decode format (Dolby
Digital, DTS, etc.).
MENU Activates BD player menu.
Navigates track listings if supported by the
player
O selects the currently highlighted track if
supported by the player
.Returns navigation to the top level of the
menu (‘Home’).
RTN When navigating a menu, press this key to
return to the previous screen or selection
SHUFF Toggles random (‘shue’) play on and o
RPT
Repeat playback of the disc or pre-
programmed selection of tracks. To repeat a
particular track, select that track and press
RPT twice. To cancel, press RPT a third time.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com