Loading...
English
CR100
E-19
Here are the factory default settings:
Mode Default
Status Default Arcam
codes
DVD mode Locked 0762
SAT mode Unlocked 0877
AV mode Unlocked 0586
TUN mode Locked 2009
AMP mode Locked 1956
AUX mode Locked 2004
VCR mode Unlocked 0111
CD mode Locked 0680
Alternative codes are available for
multi-room solutions, or in the
case of code clashes with other
manufacturer’s products.
For example:
DVD (system code 12) 1655
AMP (system code 19) 1371
You will need to change the system
code on the product you wish to
control, as well as the CR100.
Note: AMP mode is permanently
locked; it will only control Arcam

To toggle a Device Mode lock setting:
1. Press the Device Mode key you
want to unlock (e.g.

)
2. Press and hold

until the power
LED blinks twice: .
3. Press
.
< The power LED blinks twice when
being locked, and blinks four
times when being unlocked.
< If you enter an invalid key
sequence, the power LED gives
one long blink and returns to
normal operation.
While the Device Mode key is locked,
the Direct Code Setup and Move
Mode functions are not available.
Volume punch-through
Volume punch-through means that,
no matter which Device Mode is
selected, the CR100 controls the

press

on your CR100. This feature
is switched on by default.
There are times, however, when
you might want to control a device’s

Device Mode.
Example: To cancel volume
punch-through for a TV (AV
mode)
1. Press

once.
2. Press and hold

until the power
LED blinks twice: .
3. Press
.
4. Press . The power LED blinks
four times.
Now, while in TV (AV) mode, you will
be able to control the volume or mute
functions of your TV directly.
To completely cancel all volume
punch-through settings
1. Press and hold

until the power
LED blinks twice: .
2. Press
.
3. Press . The power LED blinks
four times .
Now, whichever mode you’re in, you
will have direct access to that device’s
volume or mute functions, assuming
they are available. You would need
to switch to AMP mode to alter the

Example: To restore default
volume punch-through settings in
VCR, DVD, AMP and SAT mode
1. Press and hold

until the power
LED blinks twice: .
2. Press
.
3. Press

. The power key LED
blinks twice: .
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com