Text Alignment Way:
Align multiple lines to the left
Multiple lines align centered
Align multiple lines to the right
Align multiple lines around
It can be set to Chinese, English, numbers and symbols; cannot exceed 30 characters, empty and
rename with added object are not allowed.
220.127.116.11 Scan print object (Refer to the video “Add Scan Print Object in simple mode”)
Message>New>New object>scan print
Input: Input contents represents the scan object.
Auto Sleep: Make the device into the low power state. Default value is 1s, the range is 1-60s.
Read Time: Default value is 3s, the range is 0-3600s.
Error Info: Need to turn on the right switch before use. Only support for input in English.
Font: Select the font.
Size: Set the font size.
Font effect: Bold, Italic, Add under horizontal line, Add font with
Cut Edge: Set whether the objet with white lace.
X axis coordinates: Input range -10-3000mm, you can click buttons to adjust
Y axis coordinates: Input range according to canvas amount limited, also can click
buttons to adjust slightly.
Width: You can enter 10% to 300%, the greater value, the larger width font.
Height: You can enter 10% to 300%, the greater value, the higher font.