Loading...
80
SCALE OPERATION
CALIBRATION VERIFICATION
U.S. Pounds
The following tests verify if the scale's Calibration is accurate. For Kilograms see
instructions starting on page 82.
The following tests are based on a 2-digit accuracy setting for pounds.
Increasing Load Test
Shift Test
Decreasing Load Test
Return to Zero Test
Increasing Load Test
1. Ensure there is no load on the scale platter and verify the remote display
reads 0.00 lbs.
2. Place a 5.00 lb. weight on the center of the scale platter and verify the
display reads 5.00 lbs.
3. Place an additional 5.00 lb. weight on the center of the scale platter and
verify the remote display reads between 9.99 and 10.01 lbs.
4. Place an additional 10.00 lb. weight on the center of the scale platter and
verify the remote display reads between 19.99 and 20.01 lbs.
5. Place an additional 10.00 lb. weight on the center of the scale platter and
verify the remote display reads between 29.99 and 30.01 lbs.
6. Remove all the weight from the scale platter and verify the display reads
0.00 lbs.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com