Loading...
51
INSTALLATION
SECONDARY SCANNER
13. Scan the following bar code to configure the auxiliary port on the MS2020 to
accept a Metrologic scanner as the secondary scanner.
The following bar codes do not apply when using an MS6720 as a
secondary scanner. Contact a Metrologic representative for
additional information on the MS6720. If the secondary scanner is
not a Metrologic scanner refer to Section O of the MetroSelect
Configuration Guide.
³437330
Enable Aux Port
The auxiliary input port’s data format must match the main output
format of the secondary scanner.
14. Scan the following bar codes, in order, to configure the secondary scanner
to match the auxiliary port’s data format.
1st
Enable AUX Output 2nd
Secondary Scanner
Data Format
³124817 ³437530
3rd
Enable Comm Timeouts 4th (Optional)
Turn OFF Secondary
Scanner’s Beeper
³118412 ³318505
15. Turn on the host system.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com