ASSEMBLING THE STAND (CONTINUED)
Stand Option 2: Hard-mounted to countertop (continued)
For use with kits #46-46128, #46-46351 and
MS951 Stand Replacements
Screw the stand anchor (MLPN 50-50449)
onto the base assembly until it sits flush.
Remove the logo plate on the stand by
gently using an exacto knife to release
the plate hook.
Position the stand over the base
Secure the stand to the base assembly
by installing and tightening the M3 set
screw (MLPN 18-18672) under the logo
plate as shown.
Snap the logo plate back into place.
Base Assembly from
Kit #46-46351 o
MS951 Stand Base