Loading...
5
Cloning Feature
To program several scanners with the same settings, use the Cloning feature. This
is done by connecting the cloning cable (MLPN: #51544) between two scanners.
1. Turn off both scanners.
2. Connect the cloning cable between the two scanners.
3. Turn both scanners on by plugging in the transformers.
4. Once each scanner is ready, scan the cloning bar code with the scanner
that has the settings that need to be transferred to the other scanner.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com