Version “11” Pin Assignments for RS-485
The version “11” scanner head cable is terminated with a male 25-pin D-type
connector. Connecting the scanner to the host device, may require a
communication cable. The communication cable may include a connection for a
transformer or it may be designed to draw power directly from the host device.
This can be ordered when the scanner is purchased.
The version “11” scanner is designed to be used primarily with IBM 46XX
series of electronic cash registers. It can also be configured to communicate using
the full RS-232 and OCIA protocol.
The following is a list of the pin assignments. The pin numbers are impressed on
the head cable’s connector.
Pin Function
1AC Shield Ground
2RS-232 Receive Input
3RS-232 Transmit Output
4CTS Input
5RTS Output
7Signal Ground
8 - 12 Reserved
13 Earth Ground
14 Power Ground 1
15 468X -B
16 468X +A
17 OCIA Clock In Return
18 OCIA Clock In
19 Power (11 - 30 volts) DC
20 DTR Input
21 OCIA Clock Out
22 OCIA Clock Out Return
24 OCIA RDATA Return
25 Power Ground 2
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com