Loading...
Tally Dascom DL-200 User Guide V1.1
14
2.4 Calibrate Sensor
Gap sensor and reflective sensor should be calibrated separately.
First of all, please open the setup tool, ete Pite “etup, hoose pape seso: gap seso 
default. You could switch to reflective sensor according to your need.
Make sure the driver and setup tool is installed. Please refer to p22 and p28.
2.4.1 Calibrate Gap Sensor
(1) Make sure gap sensor is selected through the setup tool.
(2) Lift the top cover to expose the media holder and the print head mechanism.
(3) Move around the sensor support so as to align its triangle with another triangle on the center
housing. As it is shown below:
2.4.2 Calibrate Reflective Sensor
(1) Select Reflective Sensor in the setup tool.
(2) Lift the top cover to expose the media holder and the print head mechanism.
(3) Align the black mark sign with the black mark sensor.
Black Mark Sign
Black Mark Sensor
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com