Loading...
User Guide Menu
63
Protocol Ready/Busy *
Xon/Xoff
Selects the type of protocol, i.e. a certain set of
rules and procedures for ensuring error-free
data exchanges between computer and prin-
ter. Details of the available protocols can be
found in the section Serial attachment
characteristics, page 131.
CTS Valid *
Invalid
Sets the signal CTS (Clear To Send) on or off.
If Parallel is selected
Parallel Bidir On *
Off
Sets the bidirectional data transfer
(IEEE1284): if set to on ECP is supported, if off
Nibble mode only is supported.
If RS232_2 is selected3)
Baud rate 2 4800
9600
19200 *
38400
Selects the data transmission rate (baud rate)
(baud = bit per second).
Data bits 2 7
8*
Selects the number of data bits per data byte.
Stop bits 2 1 *
2
Selects if one or two stop bits are used per
data byte.
Parity 2 Even
Odd
None *
The parity test for received data bytes can be
selected. None causes transmission in both
directions without parity bit. If Even or Odd is
selected, the bytes are checked to ensure they
have even or odd parity.
Protocol 2 Ready/Busy *
Xon/Xoff
Selects the type of protocol, i.e. a certain set of
rules and procedures for ensuring error-free
data exchanges between computer and prin-
ter. Details of the available protocols can be
found in the section Supported protocols,
page 131.
CTS 2 Valid *
Invalid
Sets the signal CTS (Clear To Send) on or off.
MENU
EMULATION
Emulation type Epson * (USER1)
IBM Proprinter XL
Olivetti * (USER2)
IBM 4722
Selects the emulation for the printer. For fur-
ther details refer to chapter Emulations,
page 109
T5023 Compatible No *
Ye s
Selects if the printer is compatible to the T5023
printer or not.
1) Only in Epson and IBM emulation
2) Only if MSR-H is installed
3) Only for printer model with second serial interface
Parameter group Parameter Possible settings Description
D ĂŶƚĞŶŝŵŝĞŶƚŽW ĞƌŝĨĠƌŝĐŽƐ/ŶĨŽƌŵĂƚŝĐŽƐ ͬ ĂŶƚĞƌĂƐ͕ϭϱϮϴϴϲϬW ĂƌĂĐĂƵĞůůŽƐĚĞ:ĂƌĂŵĂ;D ĂĚƌŝĚͿdĞů͗ϬϬϯϰϵϭϳϰϴϭϲϬϰt Ğď ͗ŚƚƚƉƐ͗ͬͬŵƉŝ͘ĐŽŵ͘ĞƐͬ
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com