Loading...
Tally Dascom 1125
37
Function of keys:
Tear Offkey: Decrease 0.5mm
Load/Ejectkey: Increase 0.5mm
5. Press LF/FF key, printer will print “Save settingsYes ”. Press Load/Eject key to choose Yes
or Nothen press LF/FFkey to confirm selection and exit Adjust Page Margins” mode by
pressingOnline. The print head moves to the left side and the printer beeps twice, then the print
head moves to the middle position.
Adjust Tear-Off Position Procedure:
1. Enter the Adjust Page Margins function by holding down theLoad/EjectandOnlinekeys while
powering up until the printer beeps twice.
2. Load fanfold paper.
3. The printer will print as below:
Adjust Page Margins:
LF/FF=OK Tear/Off= Back Load/Eject= Next Online= Exit
Current Setting: Adjust Fanfold Top Margin
4. PressLoad/Ejectkey until the current setting is “Adjust Tear-Off Position”
. PressLF/FFkey to
confirm selection. The printer will print as follows:
Procedure
Install fanfold paper to tractors
LF/FF= AddLoad/Eject= ReduceOnline= Exit
Each step is 0.5 mm
Function of keys:
Tear Offkey: Decrease 0.5mm
Load/Ejectkey: Increase 0.5mm
5. Press LF/FF key, printer will print “Save settingsYes ”. Press Load/Eject key to choose Yes
or Nothen press LF/FFkey to confirm selection and exit Adjust Page Margins” mode by
pressingOnline. The print head moves to the left side and the printer beeps twice, then the print
head moves to the middle position.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com