Loading...
Tally Dascom 1125
20
Adjust Physical
Margins [S3]+[S4]
L1, L2,
L3, L4
·Flashing of L3.
·Lights up L4.and L3.
·Lights up L1 or L2 according to current fonts.
·Includes Adjust Fanfold Top Margin, Adjust Single Top
Margin, Adjust Fanfold Left Margin, Adjust Single Left
Margin and Adjust Tear-Off position
Service Menu [S1]+[S2]
·Flashing of L3.
·Lights up L4.and L3.
·Lights up L1 or L2 according to current fonts.
·Functions are: Vertical Alignment, Change Pin, and
Endless Self-Test.
Restore Factory
Defaults [S2]+[S3]+[S4] L1, L2,
L3, L4
·Flashing of L3 then extinguish.
·Lights up L4.
·Lights up L1 or L2 according to current fonts.
·Restore Factory Defaults parameters except Change Pin,
Vertical Alignment and Adjust Page Margin Parameters
Menu Setup /
EDS [S1]
Allows for Main Menu setting changes. Please read the
instructions printed on how to change settings when this
mode is activated. (EDS: Electronic DIP Switch)
Language
Setup [S2]+[S3]
Allows user to select one of the following languages:
English, German, Russian, Italian, French, Spanish and
Turkish. Factory default is English. Refer to Language Setup
section below for details.
Language Setup
The panel menu can display the following languages: English, German, Russian, Italian, French, Spanish and
Turkish. Factory default setting is English. To change it to another language, hold down the [LF/FF] and
[Load/Eject] keys on the panel and power-on. Upon exiting the Language Setup Menu, a listing of the current
configuration is printed, and this is followed by Main Menu Setup.
Below is an example of changing from English to German language:
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com