Loading...
Tally Dascom 1125
19
Power-On State
Function
Name
Switch
Operation LED Function Description
Status Page /
Self Test [S4] - Prints the printer settings and self-test pattern.
Pressing S1 can change the font.
Hex Dump [S3] L4
Beeps once to indicate going into hex dump mode:
·Prints data from host in hexadecimal representation.
·Lights up L4.
·Pressing S4 suspends the printing.
·When the hex dump has finished, pressing S4 forces the
printing of the last line of data, as any line termination
control code from host has no function.
·Pressing S1 can change the font.
·Switch off the power to terminate the hex dump.
Firmware
Update
[S1]+[S2]+
[S3]+[S4]
L1, L2,
L3, L4
·Alternate flashing of L3 and L4 indicates printer is ready
for firmware update. L1 and L2 are ON and OFF
respectively.
·When new firmware is being received, L3 and L4 are set
to ON. L1 flashes a few times and then sets to ON. L2
flashing indicates downloading in progress.
·When downloading is completed, the carriage returns to
home position. Printer initializes normally.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com