Caution and Serial Number Labels
Figure 2. Labeling Example
To maintain compliance with applicable standards, all circuits connected to the
scanner must meet the requirements for SELV (Safety Extra Low Voltage) according
to EN/IEC 60950-1.
To maintain compliance with standard CSA C22.2 No. 60950-1/UL 60950-1 and norm
EN/IEC 60950-1, the power source should meet applicable performance requirements for a
limited power source.
Cable Removal
1. Locate the small ‘pin-hole’ on the side of
the QuantumT near the cable.
2. Bend an ordinary paperclip into the shape
3. Insert the paperclip (or other small metallic
pin) into the small ‘pin-hole’.
4. You will hear a faint ‘click’ when the cable
lock is released. Pull gently on the strain-
relief of the PowerLink cable to remove it
from the scanner.
Figure 3. Cable Release
Smudges and dirt can interfere with the proper scanning of a bar code. The
output window should be routinely cleaned with glass cleaner sprayed onto a lint
free, non-abrasive cleaning cloth.
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com