Loading...
Tally Dascom 1145/1125+
22
Function
Name
Switch
Operation
LED
Function Description
Hex Dump
[S3]
-
Beeps once to indicate going into hex dump mode:
Prints data from host in hexadecimal
representation.
Pressing S4 suspends the printing.
When the hex dump has finished, pressing S4
forces the printing of the last line of data, as any
line termination control code from host has no
function.
Switch off the power to terminate the hex dump.
Menu Setup
/ EDS
[S1]
-
Allows for Main Menu setting changes. Please read
the instructions printed on how to change settings
when this mode is activated. (EDS: Electronic DIP
Switch)
Self Test /
Status Page
[S4]
-
Prints the printer settings and self-test pattern.
Firmware
Update
[S1]+[S2]+[S3]
+ [S4]
L3, L4
Alternate flashing of L3 and L4 indicates ready
for firmware update from host.
When new firmware is being received: L3 and L4
flash together, while L1 and L2 LEDs are
constantly on.
When downloading is completed, the carriage
returns to home position. Printer initializes normally.
Restore
Factory
Defaults
[S2] + [S4]
-
Restore all settings to factory defaults.
The carriage initializes and the printer beeps once
after restoration.
Customize
Form
[S3] + [S4]
To customize the margins and tear-off position,
please refer Chapter 6 for details.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com