1. Green & Red LEDs
The MS6220 laser pulses on and off during normal operation. When the
laser is on, the green LED will be on. When the laser is off, the green LED
will be off. On a successful read of a bar code, the red LED will flash and
the scanner will beep once. The LEDs are also used as diagnostic
indicators and mode indicators.
2. Output Window
Laser Light emits from this aperture.
3. PowerLink Cable
The 10-pin modular plug on the PowerLink cable connects into the 10-pin
modular jack on the MS6220.
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com