Making and Receiving Calls
Press One Touch Access button. The DTMF tone sounds.
If the entry for the One Touch Access button is empty, a
negative indicator tone sounds.
8Press R to end the call.
If deaccess code was not preconfigured in the Contacts list,
the first line of the display shows De-Access Code:. The
second line of the display shows a blinking cursor. Enter the
deaccess code and press N to proceed. The radio returns
to the previous screen.
9The DTMF tone sounds and the display shows Ending
10 If successful:
A tone sounds and the display shows Phone Call Ended.
Your radio returns to the Call Phone screen.
Your radio returns to the Phone Call screen. Repeat Steps 8
and 9 or wait for the telephone user to end the call.
When you press PTT button while in the Phone Contacts
screen, a tone sounds and the display shows Press OK to
Place Phone Call.
When the telephone user ends the call, a tone sounds and the
display shows Phone Call Ended.
If the call ends while you are entering the extra digits requested
by the Phone Call, your radio returns to the screen you were on
prior to initiating the call.
NOTE: During channel access, press R to dismiss the call
attempt and a tone sounds.
During the call, when you press One Touch Access
button with the deaccess code preconfigured or enter
the deaccess code as the input for extra digits, your
radio attempts to end the call.
During channel access and access/deaccess code or
extra digits transmission, your radio responds to On/
Off/Volume Control Knob and Channel Selector
Knob only. A tone sounds for every invalid input.
The access or deaccess code cannot be more than 10