Loading...
Making and Receiving Calls
English
34
7Release the PTT button to listen. When the target radio
responds, the LED blinks green.
8If the Channel Free Indication feature is enabled, you will
hear a short alert tone the moment the target radio releases
the PTT button, indicating the channel is free for you to
respond. Press the PTT button to respond.
OR
If there is no voice activity for a predetermined period of
time, the call ends.
9You hear a short tone when the call ends and the radio
returns to the screen you were on prior to initiating the call.
Making a Phone Call
Procedure:
1Press the programmed Manual Dial button to enter into the
Manual Dial screen.
2Por Q to Phone Number and press N to select.
3The first line of the display shows Phone Number:. The
second line of the display shows a blinking cursor. Use the
keypad to enter a telephone number and press N to
proceed.
If the access code was not preconfigured in the Contacts
list, the first line of the display shows Access Code:. The
second line of the display shows a blinking cursor. Enter the
access code and press N to proceed.
4The first line of the display shows Calling. The second line
of the display shows the subscriber alias or ID, and the
Phone Call icon.
5If successful:
The DTMF tone sounds. You hear the dialing tone of the
telephone user. The first line of the display shows the
subscriber alias or ID, and the RSSI icon. The second line of
the display shows Phone Call and the Phone Call icon.
OR
If unsuccessful:
A tone sounds and the display shows Phone Call Failed.
Your radio returns to the Access Code input screen.
If the access code was preconfigured in the Contacts list,
the radio returns to the screen you were on prior to initiating
the call.
6Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
7Press the PTT button to talk and release it to listen. The
RSSI icon disappears during transmission.
To enter extra digits, if requested by the Phone Call:
Press any keypad to begin the input of extra digits. The first
line of the display shows Extra Digits:. The second line
of the display shows a blinking cursor. Enter the extra digits
and press N to proceed. The DTMF tone sounds and the
radio returns to the previous screen.
OR
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com