Making and Receiving Calls
A tone sounds and the display shows Phone Call Ended.
Your radio returns to the screen you were on prior to
initiating the call.
Your radio returns to the Phone Call screen. Repeat Steps 7
and 8 or wait for the telephone user to end the call.
When you press PTT button while in the Phone Contacts
screen, a tone sounds and the display shows Press OK to
Place Phone Call.
When the telephone user ends the call, a tone sounds and the
display shows Phone Call Ended.
If the call ends while you are entering the extra digits requested
by the Phone Call, your radio returns to the screen you were on
prior to initiating the call.
NOTE: During channel access, press R to dismiss the call
attempt and a tone sounds.
During the call, when you press One Touch Access
button with the deaccess code preconfigured or enter
the deaccess code as the input for extra digits, your
radio attempts to end the call.
During channel access and access/deaccess code or
extra digits transmission, your radio responds to On/
Off/Volume Control Knob and Channel Selector
Knob only. A tone sounds for every invalid input.
The access or deaccess code cannot be more than 10
Making a Call with the Programmable Manual Dial
Making a Private Call
1Press the programmed Manual Dial button to enter into the
Manual Dial screen.
2Por Q to Radio Number and press N to select.
3The first line of the display shows Radio Number:. The
second line of the display shows a blinking cursor. Use the
keypad to enter a subscriber alias or ID.
4Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
5Press the PTT button to make the call. The LED lights up
solid green. The display shows the subscriber alias or ID,
and the Private Call icon.
6Wait for the Talk Permit Tone to finish (if enabled) and speak
clearly into the microphone.